Langkau ke kandungan utama

Contoh-contoh primitif

Model pelaksanaan baharu, kini dalam keluaran beta

Keluaran beta bagi model pelaksanaan baharu kini tersedia. Model pelaksanaan terarah memberikan lebih fleksibiliti apabila menyesuaikan aliran kerja pengurangan ralat anda. Lihat panduan Model pelaksanaan terarah untuk maklumat lanjut.

Versi pakej

Kod pada halaman ini dibangunkan menggunakan keperluan berikut. Kami mengesyorkan penggunaan versi ini atau yang lebih baharu.

qiskit[all]~=2.3.0
qiskit-ibm-runtime~=0.43.1

Contoh-contoh dalam bahagian ini menggambarkan beberapa cara biasa untuk menggunakan primitif. Sebelum menjalankan contoh-contoh ini, ikuti arahan dalam Pasang dan sediakan.

nota

Semua contoh ini menggunakan primitif daripada Qiskit Runtime, tetapi anda boleh menggunakan primitif asas sebagai gantinya.

Contoh-contoh Estimator​

Kira dan tafsirkan nilai jangkaan operator kuantum yang diperlukan untuk banyak algoritma dengan cekap menggunakan Estimator. Terokai kegunaannya dalam pemodelan molekul, pembelajaran mesin, dan masalah pengoptimuman yang kompleks.

Jalankan satu eksperimen​

Gunakan Estimator untuk menentukan nilai jangkaan bagi sepasang Circuit-observable tunggal.

# Added by doQumentation — required packages for this notebook
!pip install -q numpy qiskit qiskit-ibm-runtime
import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import SparsePauliOp, random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, EstimatorV2 as Estimator

n_qubits = 50

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

mat = np.real(random_hermitian(n_qubits, seed=1234))
circuit = iqp(mat)
observable = SparsePauliOp("Z" * 50)

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)
isa_observable = observable.apply_layout(isa_circuit.layout)

estimator = Estimator(mode=backend)
job = estimator.run([(isa_circuit, isa_observable)])
result = job.result()

print(f" > Expectation value: {result[0].data.evs}")
print(f" > Metadata: {result[0].metadata}")
> Expectation value: -0.13582342954159593
 > Metadata: {'shots': 4096, 'target_precision': 0.015625, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}

Jalankan beberapa eksperimen dalam satu kerja​

Gunakan Estimator untuk menentukan nilai jangkaan bagi beberapa pasangan Circuit-observable.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import SparsePauliOp, random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, EstimatorV2 as Estimator

n_qubits = 50

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng()
mats = [np.real(random_hermitian(n_qubits, seed=rng)) for _ in range(3)]

pubs = []
circuits = [iqp(mat) for mat in mats]
observables = [
    SparsePauliOp("X" * 50),
    SparsePauliOp("Y" * 50),
    SparsePauliOp("Z" * 50),
]

# Get ISA circuits
pm = generate_preset_pass_manager(optimization_level=1, backend=backend)

for qc, obs in zip(circuits, observables):
    isa_circuit = pm.run(qc)
    isa_obs = obs.apply_layout(isa_circuit.layout)
    pubs.append((isa_circuit, isa_obs))

estimator = Estimator(backend)
job = estimator.run(pubs)
job_result = job.result()

for idx in range(len(pubs)):
    pub_result = job_result[idx]
    print(f">>> Expectation values for PUB {idx}: {pub_result.data.evs}")
    print(f">>> Standard errors for PUB {idx}: {pub_result.data.stds}")
>>> Expectation values for PUB 0: 0.4873096446700508
>>> Standard errors for PUB 0: 1.3528950031716114
>>> Expectation values for PUB 1: -0.00390625
>>> Standard errors for PUB 1: 0.015347884419435263
>>> Expectation values for PUB 2: -0.02001953125
>>> Standard errors for PUB 2: 0.013797455737635134

Jalankan Circuit berparameter​

Gunakan Estimator untuk menjalankan tiga eksperimen dalam satu kerja, memanfaatkan nilai parameter bagi meningkatkan kebolehgunaan semula Circuit.

import numpy as np

from qiskit.circuit import QuantumCircuit, Parameter
from qiskit.quantum_info import SparsePauliOp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit_ibm_runtime import QiskitRuntimeService, EstimatorV2 as Estimator

service = QiskitRuntimeService()
backend = service.least_busy(operational=True, simulator=False)

# Step 1: Map classical inputs to a quantum problem
theta = Parameter("θ")

chsh_circuit = QuantumCircuit(2)
chsh_circuit.h(0)
chsh_circuit.cx(0, 1)
chsh_circuit.ry(theta, 0)

number_of_phases = 21
phases = np.linspace(0, 2 * np.pi, number_of_phases)
individual_phases = [[ph] for ph in phases]

ZZ = SparsePauliOp.from_list([("ZZ", 1)])
ZX = SparsePauliOp.from_list([("ZX", 1)])
XZ = SparsePauliOp.from_list([("XZ", 1)])
XX = SparsePauliOp.from_list([("XX", 1)])
ops = [ZZ, ZX, XZ, XX]

# Step 2: Optimize problem for quantum execution.

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
chsh_isa_circuit = pm.run(chsh_circuit)
isa_observables = [
    operator.apply_layout(chsh_isa_circuit.layout) for operator in ops
]

# Step 3: Execute using Qiskit primitives.

# Reshape observable array for broadcasting
reshaped_ops = np.fromiter(isa_observables, dtype=object)
reshaped_ops = reshaped_ops.reshape((4, 1))

estimator = Estimator(backend, options={"default_shots": int(1e4)})
job = estimator.run([(chsh_isa_circuit, reshaped_ops, individual_phases)])
# Get results for the first (and only) PUB
pub_result = job.result()[0]
print(f">>> Expectation values: {pub_result.data.evs}")
print(f">>> Standard errors: {pub_result.data.stds}")
print(f">>> Metadata: {pub_result.metadata}")
>>> Expectation values: [[ 1.0455093   0.98152862  0.82113463  0.60354133  0.29572641  0.01149883
  -0.33110743 -0.60560522 -0.83322315 -0.96531231 -1.0257549  -0.95853095
  -0.81081517 -0.61091237 -0.30221293  0.0035381   0.31371176  0.61061753
   0.83646641  0.97091431  1.03135689]
 [ 0.03390682  0.31194271  0.620937    0.87391133  0.96973494  1.03872794
   0.94260949  0.82378821  0.56344283  0.28688115 -0.04570049 -0.37474403
  -0.64540887 -0.87803912 -0.97887504 -1.03577952 -0.97268336 -0.83970967
  -0.59705481 -0.29867482  0.0380346 ]
 [ 0.00265358 -0.32992806 -0.59646512 -0.80934096 -0.96737621 -1.00128302
  -0.94673728 -0.82703147 -0.59705481 -0.31341692 -0.00117937  0.29985419
   0.59469607  0.78486908  0.93346939  0.97622146  0.94732696  0.81199454
   0.60914332  0.28393273 -0.00678136]
 [ 0.99656555  0.93553328  0.78398456  0.55872536  0.29749546 -0.04511081
  -0.33523522 -0.62889773 -0.82201916 -0.95351864 -1.02634458 -0.96796589
  -0.82054495 -0.57553135 -0.30103356  0.00265358  0.3104685   0.59705481
   0.83322315  0.94437854  0.99214292]]
>>> Standard errors: [[0.014353   0.01441151 0.01620648 0.0195418  0.019762   0.01515649
  0.02102523 0.02112359 0.0148494  0.01119219 0.01576623 0.01245824
  0.01239832 0.01501273 0.01821305 0.01776286 0.01500156 0.01635231
  0.01577367 0.01315371 0.01089558]
 [0.01352805 0.01627835 0.01247646 0.01287866 0.01570182 0.01060924
  0.01590468 0.01620303 0.01530626 0.01619973 0.01918078 0.01379676
  0.01564971 0.01377673 0.01454324 0.01242184 0.01252201 0.01396738
  0.01326188 0.0145736  0.01795044]
 [0.02029376 0.01610892 0.0161542  0.0157785  0.01385665 0.01113743
  0.01375237 0.01380922 0.0145974  0.01759484 0.01594193 0.02111719
  0.01521368 0.01365888 0.01188512 0.01353009 0.01195674 0.01446547
  0.01660987 0.01511225 0.01880871]
 [0.01105161 0.01164476 0.01329858 0.01439545 0.01888747 0.01629201
  0.01405852 0.01406643 0.01088709 0.01275198 0.01281432 0.01333301
  0.01268483 0.01443594 0.01495655 0.01715532 0.01822699 0.01508936
  0.01435528 0.01340555 0.01295649]]
>>> Metadata: {'shots': 10016, 'target_precision': 0.01, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}

Gunakan Session dan pilihan lanjutan​

Terokai Session dan pilihan lanjutan untuk mengoptimumkan prestasi Circuit pada QPU.

awas

Blok kod berikut akan mengembalikan ralat bagi pengguna Pelan Terbuka kerana ia menggunakan Session. Beban kerja Pelan Terbuka hanya boleh dijalankan dalam mod kerja atau mod kelompok.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import SparsePauliOp, random_hermitian
from qiskit_ibm_runtime import (
    QiskitRuntimeService,
    Session,
    EstimatorV2 as Estimator,
)

n_qubits = 50

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng(1234)
mat = np.real(random_hermitian(n_qubits, seed=rng))
circuit = iqp(mat)
mat = np.real(random_hermitian(n_qubits, seed=rng))
another_circuit = iqp(mat)
observable = SparsePauliOp("X" * 50)
another_observable = SparsePauliOp("Y" * 50)

pm = generate_preset_pass_manager(optimization_level=1, backend=backend)
isa_circuit = pm.run(circuit)
another_isa_circuit = pm.run(another_circuit)
isa_observable = observable.apply_layout(isa_circuit.layout)
another_isa_observable = another_observable.apply_layout(
    another_isa_circuit.layout
)

with Session(backend=backend) as session:
    estimator = Estimator(mode=session)

    estimator.options.resilience_level = 1

    job = estimator.run([(isa_circuit, isa_observable)])
    another_job = estimator.run(
        [(another_isa_circuit, another_isa_observable)]
    )
    result = job.result()
    another_result = another_job.result()

    # first job
    print(f" > Expectation value: {result[0].data.evs}")
    print(f" > Metadata: {result[0].metadata}")

    # second job
    print(f" > Another Expectation value: {another_result[0].data.evs}")
    print(f" > More Metadata: {another_result[0].metadata}")
> Expectation value: 0.08045977011494253
 > Metadata: {'shots': 4096, 'target_precision': 0.015625, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}
 > Another Expectation value: 0.02127659574468085
 > More Metadata: {'shots': 4096, 'target_precision': 0.015625, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}

Contoh-contoh Sampler​

Jana taburan kebarangkalian-kuasi yang telah dikurangkan ralat sepenuhnya daripada output Circuit kuantum. Manfaatkan keupayaan Sampler untuk algoritma carian dan pengelasan seperti Grover's dan QVSM.

Jalankan satu eksperimen​

Gunakan Sampler untuk mengembalikan hasil pengukuran sebagai bitstring atau kiraan bagi satu Circuit tunggal.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, SamplerV2 as Sampler

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

mat = np.real(random_hermitian(n_qubits, seed=1234))
circuit = iqp(mat)
circuit.measure_all()

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)

sampler = Sampler(backend)
job = sampler.run([isa_circuit])
result = job.result()

# Get results for the first (and only) PUB
pub_result = result[0]

print(f" > First ten results: {pub_result.data.meas.get_bitstrings()[:10]}")
> First ten results: ['0101110000110001001111000101001111000110110100011000100101011101110011010010010101000110000111101010101000001010000100100000100', '0100010101111101010000100010011100110001010000011000000010001100010111000011001010000100100000100000000010000000010010101011110', '1101010111111111100010000011101010101010100100011001000000001001110010001000000010000010000101000111000100010010000001111000010', '1001110001100001001101111010111100000100010110010001001100111000110010111000001010001000000000000000100101101001110010101000110', '0001000000011011000011000111001000000000100110110011111110110100110000101010100010000010101011011000101011101000100000110000011', '1011100010011111010000001110110000111101000001110010011001100011111010001100100000110001000010001010110011100010000111000111010', '1101110000011000001011011000001111001110010111111111100100010001110100000010000001011000110000000011010011110100101001101000010', '0110100000110011000011001000110110110001000100100001111010001101000001010111000000101010101000001110100100001010110001000100101', '1000011010011011001111010010100000001110010010100000011010000110011010100000111000010010100111000001100101100010110010101001010', '1011011100111001010010101001000111000001110011110011001111010100100011101111011101011000000111011010000011100011010000001000000']

Jalankan beberapa eksperimen dalam satu kerja​

Gunakan Sampler untuk mengembalikan hasil pengukuran sebagai bitstring atau kiraan bagi beberapa Circuit dalam satu kerja.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, SamplerV2 as Sampler

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng()
mats = [np.real(random_hermitian(n_qubits, seed=rng)) for _ in range(3)]
circuits = [iqp(mat) for mat in mats]
for circuit in circuits:
    circuit.measure_all()

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuits = pm.run(circuits)

sampler = Sampler(mode=backend)
job = sampler.run(isa_circuits)
result = job.result()

for idx, pub_result in enumerate(result):
    print(
        f" > First ten results for pub {idx}: {pub_result.data.meas.get_bitstrings()[:10]}"
    )
> First ten results for pub 0: ['1000000101000100010111001010101010000001001010101011011001011110001000000110110101010000010000000000110001001000011111110000001', '1111101011011011110001011000001100001101100001000101111011101110000101111010001011111010001001000010111001110111000010001011010', '1100100101110010000110101011110010111001101010001101100010110100110110000110110010001110001000001010011100001000011011000111010', '1100010010000100100010110100011010011001010101101101101001100001001110011001011011111100011100100001000101010000111101110001101', '0011101011101100010011111001001110000101100110000110000001111000011010011110000110100000110011011000000010110001010000111000100', '0110101101110000010110100100010011000100100010000010010010110001111111110000101011000100010000000100100100110011010111101110111', '1101011000111100011000010110000010001100101011000001110010110001111101010101011110110010000100011101000001010110010101000000100', '0000101010010100000010111110111000001011000000001011000110100010110011111000110110010110011010111101001011000000001101001110110', '1100101000110001000011111110010001011000010110010101101000000101011110000100011011111011011010001001110011011101001101010100000', '0110011000101110101001010100110010101000010111100001000111011000110101011010010101110011001010101000001001001000110010100010101']
 > First ten results for pub 1: ['1100100001011010010100000110101010100111101100110000100001011000100010001101010101101110000011010010011000010000010001000001000', '1100000011000000100110011000000110010000011111000000001010000101000010011001000001010000001000001010001000110010111000010000000', '0010000111101000111010101010101001010000001110100001011011100011000111000000010101001000010101001100000010100010011000000000010', '0010100100001000011100001010011000001010000010001000000001011100001010001110010110111101101000001101010101000000000011000100110', '0101101000011110111000100010000000101110100001010101110010001100001100001000111111110101001010100110000000010011111111000000010', '0101010111000000001110100110100011010111000111110100010010010001011010001000101001100001100110001001001000010010000011100100000', '0110010000001110111010010100010010010011010010110101001110010010001001101010111000010000000100011001001000001111010001100010010', '1100001100101011011010000110111110001101010100010100101100111000010000101101101010111011111011101100000000110000100101001000101', '0000111100001000000101101001010111110100011011011101101111000000001010001001100010110000100000000001010100110001001100110010000', '0100100001001011110000110001100001111011111100000001010111011011100010110111101110101111101010100101000000110111000110000000000']
 > First ten results for pub 2: ['1000010100111010101010111110101000110101010001111110011110011001010100001100100000000001000111111011001101100001001110011101100', '1110100000111000000000110110010100000011110000011110000110100010000100001100010101101001100100010111000010100101011000001000000', '1000010111011000000001110111010101000111111010010011110100001010000000111111100100001111111101010100001001011100111101010000010', '0000111011110110010011100111001010001000011010010110010010101000101110011100000010000101011000101001001001000100111101010100100', '0100000100111101110000101111011000100111101011101110100001000001000010101111100100000111010001101001100001100011011110101101100', '0100001000110101010010010100100110000100001010100001110001110101010011000111100111001001100000010100110111010111010100010100100', '0011111000010001101100000110111001000000100111110100001100001100010010010101011000000111011011111010100010000100100000100000000', '1000010010101100110110110110100010100000111001101011110100001000011000001000000110010001001011100100000000100000000000000000000', '0001011100010011111110011110000001000000010100111111000000101010000011011110110000110001010010000010010001000101110001111100010', '1111010100011100010010010110000101110000010001100101011111001100010111100001011001000001011010111011100001000001100000000000110']

Jalankan Circuit berparameter​

Jalankan beberapa eksperimen dalam satu kerja, memanfaatkan nilai parameter bagi meningkatkan kebolehgunaan semula Circuit.

import numpy as np
from qiskit.circuit.library import real_amplitudes
from qiskit.transpiler import generate_preset_pass_manager
from qiskit_ibm_runtime import QiskitRuntimeService, SamplerV2 as Sampler

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

# Step 1: Map classical inputs to a quantum problem
circuit = real_amplitudes(num_qubits=n_qubits, reps=2)
circuit.measure_all()

# Define three sets of parameters for the circuit
rng = np.random.default_rng(1234)
parameter_values = [
    rng.uniform(-np.pi, np.pi, size=circuit.num_parameters) for _ in range(3)
]

# Step 2: Optimize problem for quantum execution.

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)

# Step 3: Execute using Qiskit primitives.
sampler = Sampler(backend)
job = sampler.run([(isa_circuit, parameter_values)])
result = job.result()
# Get results for the first (and only) PUB
pub_result = result[0]
# Get counts from the classical register "meas".
print(
    f" >> First ten results for the meas output register: {pub_result.data.meas.get_bitstrings()[:10]}"
)
>> First ten results for the meas output register: ['1100011011100001011000001001000001111110000001011100011110011100111110000111000100011100001111100010010111110001001111011000101', '1100011101010101010000100110110110010001100101011101001011101010111110000111110100000011111010101101011101101101001111011110011', '0000000011000011001101001000111110001100010010011011001111000101000000001111111101101011100111010110111101010111011001010001011', '0101010001101110100010001100111001011101101100001000100001011101110100001000011011001011110101000110010001001010011011100011101', '0110101110000010110000001000010101100010010001001001101000010100110001011111110001000001100110010001011111001010011001001000101', '0111011111110111010111100110101000010100101000001010001001011111010010100111110110000011100001100000110000111000011011100000000', '0110100111001000100100110110010001011110000000110111000011110000100111001000100110011100100001100000101111111100010111100111001', '0101101111010110000000001000010110100101001100001101110010101111010110001010000111010010001111000000011001001001111100111010110', '0100000110010101111011110111000010001101011110010000110010001111001101010010000011111100100101101000010000111100111010000000110', '0011110110011011000110000100100110111000000010010101111011111000111001100011110100001100010100100001110101110100011100110001100']

Gunakan Session dan pilihan lanjutan​

Terokai Session dan pilihan lanjutan untuk mengoptimumkan prestasi Circuit pada QPU.

awas

Blok kod berikut akan mengembalikan ralat bagi pengguna Pelan Terbuka, kerana ia menggunakan Session. Beban kerja Pelan Terbuka hanya boleh dijalankan dalam mod kerja atau mod kelompok.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.quantum_info import random_hermitian
from qiskit.transpiler import generate_preset_pass_manager
from qiskit_ibm_runtime import Session, SamplerV2 as Sampler
from qiskit_ibm_runtime import QiskitRuntimeService

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng(1234)
mat = np.real(random_hermitian(n_qubits, seed=rng))
circuit = iqp(mat)
circuit.measure_all()
mat = np.real(random_hermitian(n_qubits, seed=rng))
another_circuit = iqp(mat)
another_circuit.measure_all()

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)
another_isa_circuit = pm.run(another_circuit)

with Session(backend=backend) as session:
    sampler = Sampler(mode=session)
    job = sampler.run([isa_circuit])
    another_job = sampler.run([another_isa_circuit])
    result = job.result()
    another_result = another_job.result()

# first job

print(
    f" > The first ten measurement results of job 1: {result[0].data.meas.get_bitstrings()[:10]}"
)
> The first ten measurement results of job 1: ['1101100010101100001001110000100011110011000010110000010000001011000110000110010100011000101111011110010101101001000101010100010', '0010100100011100001011111101001010010000010010000100000011001010001110101011010000100011001010000101110101110110010000110001110', '1011000110110011011010001111001011111000011111111010010010011000000110000001000101001111001000010110000000011101010000111101101', '0101000010000101001011111010110011101000100101010011001000010000011010000010101000000001000100010100011100101001000101001011000', '1101010101011100000001100110111001000100110011110001110011000000110100011011100000010000001100001101011000000001010101001101001', '1111100011111010000000100011100110101000010101100100000110000110001011100000000101010110011110010010000100011110000010101010100', '1011011100110001000110100100110010101101110010100010011100001000001100010101101110010101100000001110000000111001001000000100010', '0100011011110111010010111011101010111010010011011110011001000010101110100100111010110001101100110001010100000101001000000111001', '0001110001110000001011101101010001001110000010100001000101100100110111001011100000101010011100011001110011100100000000010110001', '1010110110111000001100011100000100101000000001111110110010000110011100100100100010000101111110100110010010010101001011001000011']
# second job
print(
    " > The first ten measurement results of job 2:",
    another_result[0].data.meas.get_bitstrings()[:10],
)
> The first ten measurement results of job 2: ['0100010001111001111010000100101010011010000100010110100100010010010110001010101010000000110000010000001100100011000110101000001', '1101000100010000011100110101001110101100001000000000101001110110110010110110010010011100010000010001011000011100100000100000000', '1111101010100011010100000100010101111110011000000000010000010000101001010001100000100000100010000001100111000000111000111010000', '0101111100000110010101101100101110101011010100001001110101100010111100110011100001110101000000001000000000101000100000001000000', '1101001000000000011000010100111110101111001001110011100001100100100100000011110001001000001000010101111100001001110010110011100', '1100001000110110000111110110010010000100001000001001100011110001111100100101110010010111010010101100001010101011100100001010010', '0001001100010000000101101101101111000011101100101000111010000000000010010111011000100000011010100000100011100010110010010000001', '1010101100000000011000111101000011100101000110110000111111000001100010001110000101111111110110000000000000001000000010001110000', '1111111001001001001100010000101110110100001011011100010001100000100001010100111011000110100011110000001010101000010000000011000', '1011011010101100010101100001001000000010110001101000100001111010000100011100000000100111001001000001001001101000001000100000000']

Langkah seterusnya​

Cadangan
Source: IBM Quantum docs — updated 27 Apr 2026
English version on doQumentation — updated 7 Mei 2026
This translation based on the English version of 11 Mac 2026